小中大【回复】
两天花费一些功夫找到一些参数,希望有用。
1. 我的样品是多壁碳纳米管,用硫酸和硝酸按照一定比例处理的。
2. 我做拉曼的参数如下:
数据描述
点数: 3424
X-轴: 拉曼位移 (cm-1)
Y-轴: 拉曼强度
X 轴起点: 199.1177
X 轴终点: 3499.6895
Raman 激光频率: 18797.2520
数据点间隔: 0.964234
数据采集信息
曝光时间: 20.00 sec
曝光次数: 4
背景曝光次数: 512
光谱仪描述
光谱仪: DXR Raman Microscope
光学台序列号: AIY1405076
激光: 532 nm
激光序列号: AJC1400816
过滤器: 532 nm
过滤器序列号: AJM1400694
光栅: 900 刻线/mm
光栅序列号: AJG1400693
光阑: 50 ?m 狭缝
摄像头 到温度
采集错误
样品采集错误
被拒绝的扫描次数:0
错误类型:
无
数据处理记录
Collect Sample
Background collected: Fri Jul 04 00:07:34 2014 (GMT-07:00)
Final format: Shifted spectrum (cm-1)
Calibrated: Sun Sep 28 10:07:36 2014 (GMT-07:00)
Resolution: 1.9285 Raman shift (cm-1) from 199.1177 to 3499.6895
Camera temperature: -50 C
White light corrected
Fluorescence corrected:
Polynomial order: 6
Cosmic ray threshold: Medium
Smart background used
Laser state: OK
Title changed on Wed Nov 19 15:04:31 2014 (GMT-08:00)
Previous Title: Wed Nov 19 15:02:55 2014 (GMT-08:00)
SYSTEM STATUS
Instrument Status Fail Date Tested: Wed, Nov 19 2014
Scheduled Maintenance Disabled
当前数字签名状态
目前没有签名。
实验信息:
实验文件名: C:\My Documents\Omnic\VRParam\dxr_rm_default.exp
实验标题: Default - DXR Raman Microscope
实验附件: Microscope
光谱质量检查结果:
检测器饱和检查已通过
光谱峰检查已通过
干涉条纹检查已通过
光谱中存在似乎荧光
3. 参考文献中图的参数:
The Raman spectra were collected on a Renishaw Raman spectrometer using 514 nm laser.
文章中关于拉曼的描写:As shown in Figure S6, a D-band located around 1342 cm-1 and a G-band around 1570 cm-1 were observed. The higher order peak appeared at 2670 cm -1 and a small broad peak at 2910 cm-1 can be assigned to a combination of D+D and D+G bands, respectively. The G band arises from the bond stretching of all sp2-bonded pairs, including C-C, B-C, N-C, and B-N, while the D-band is associated with the sp3 defect sites.
麻烦您了!
wulishi8 (站内联系TA)
6楼: Originally posted by 朱雀琳琅 at 2015-04-26 09:19:44
您好!
这两天花费一些功夫找到一些参数,希望有用。
1. 我的样品是多壁碳纳米管,用硫酸和硝酸按照一定比例处理的。
2. 我做拉曼的参数如下:
数据描述
点数: 3424
X-轴: 拉曼位移 (cm-1)
Y-轴: ...
你给的这么多信息只有两点最重要。
1. 我的样品是多壁碳纳米管,用硫酸和硝酸按照一定比例处理的。
2. 532nm激光测试。
有一点很重要的信息没有给出,那就是激光到达样品处的功率和镜头倍数。这个涉及到样品被激光加热的问题。
1340,1572,1717,2454,2659,2920 cm^-1处的峰分别对应于:D峰,G峰(一般应该在1580附近,假如样品被激光加热,那么G峰向低频移动),M峰(包含两个,是OTO的倍频峰),2D峰的非(弱)色散峰(目前的研究还不够,这个峰还不确定是非色散的LO模式还是色散型的LA模式,亦或是两者兼有),色散型的传统2D峰(叫做G‘更准确,因为和D关系很小,只是频率约等于两倍的D峰频率,千万不要误以为是D的倍频峰),D峰+G峰。
另,再往后3160左右,是G的倍频峰,即2G峰。