热分析,然后转化成结构分析单元计算。结果出现

我是先进行热分析,然后转化成结构分析单元计算。结果出现
*** WARNING ***   SUPPRESSED MESSAGE    CP =      33.672   TIME= 00:51:57
Constraint on line 177 with inactive load label TEMP not transferred to
nodes.                                                                 
*** WARNING ***   SUPPRESSED MESSAGE    CP =      33.672   TIME= 00:51:57
Constraint on line 178 with inactive load label TEMP not transferred to
nodes.                                                                 
*** WARNING ***   SUPPRESSED MESSAGE    CP =      33.672   TIME= 00:51:57
Constraint on line 187 with inactive load label TEMP not transferred to
nodes.                                                                 
*** WARNING ***   SUPPRESSED MESSAGE    CP =      33.734   TIME= 00:51:58
Previous testing revealed that 9 of the 17605 selected elements violate
shape warning limits.  To review warning messages, please see the      
output or error file, or issue the CHECK command.                     
*** ERROR ***     SUPPRESSED MESSAGE    CP =      33.922   TIME= 00:51:58
Element 15435 references undefined EX of material 5451.
我也来说两句 查看全部回复

最新回复

  • p1900 (2016-1-29 11:22:52)

    是不是网格画的太密了,或者是建模的时候存在过小的尖角的原因啊,你看看177,178,187那三条线那有什么问题
  • wwwh (2016-1-29 11:23:46)

    网格是比较密,难道要重划分网格么
  • 小女人@ (2016-1-29 11:24:22)

    你先看看那三条线是不是有交点,有没有狭缝,需不需要修改然后再改网格吧,画网格也挺慢的。
  • p1900 (2016-1-29 11:24:49)

    ANSYS在做热-应力耦合分析时,在分析结果中,如何只查看温度场云图,不含变形?如何做到,有什么命令吗
  • n111 (2016-1-29 11:25:11)

    在后处理中,仅选择温度选项,重画云图,即可显示温度场云图,不显示应力。但是温度场是在变化了实体中的温度场,每一工步都是耦合的,不能分开,否则皮之不存毛将焉附
  • 886爱 (2016-1-29 11:25:32)

    能帮忙做下ansys热-应力耦合分析啊
  • xiaoxiaoai (2016-1-29 11:26:06)

    题目:一个空心球壳,内径30,外径60,内径温度500度,外径0度,稳态分析,要温度场跟应力场云图和径向分布曲线,